This controller will operate both normal RGB (Red, Green, & Blue) and RGBW (RGB + White).
Bluetooth LED controller RGB / RGBW :
PlashLights waterproof Bluetooth controller is operated via a mobile phone app to turn on/off, adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from.
The operation is very simple with mobile phone control (IOS or Android). The controller has a memory feature. Your phone is not needed when a switch is installed as the lights will defer to the last setting when powered on (Example: If you have them on a blue strobe pattern and turn the power off, when power is reapplied later, the lights will still be set on blue strobe). Basically, your phone is only required to change the color or patterns.
Requires download of PlashLights APP (FREE)
Simple to mount with a tab on each side
IP67 Rated Enclosure = Waterproof
Easily control and synchronize up to 720 Watts of lighting
45A when RGB used (15A/per channel)
60A when RGB+W used (15A/per RGB channel & 15A white)
Compatibility: Bluetooth 4.0 (Bluetooth phones of 4.0 or above)
Supports mobile phone system: IOS 6.0 android 4.3 or above
Operating Voltage: 12~24V DC
Software language: English
Control distance: 65 feet
Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
Working temperature: - 4°F to 185°F
RGB = B/15A; G/15A; R/15A; Total Out: 45A
RGBW = B/15A; G/15A; R/15A; W/15A; Total Out: 60A
100% MADE & ASSEMBLED IN USA
Instructions included on APP